ChEMBL ligand: CHEMBL5838116
leucine rich repeat kinase 2/Leucine-rich repeat serine/threonine-protein kinase 2 in Human [ChEMBL: CHEMBL1075104] [GtoPdb: 2059] [UniProtKB: Q5S007] There should be some charts here, you may need to enable JavaScript!

DB	Assay description	Assay Type	Standard value	Standard parameter	Original value	Original units	Original parameter	Reference
leucine rich repeat kinase 2/Leucine-rich repeat serine/threonine-protein kinase 2 in Human (target type: SINGLE PROTEIN) [ChEMBL: CHEMBL1075104] [GtoPdb: 2059] [UniProtKB: Q5S007]
GtoPdb	-	-	7.52	pIC50	<30	nM	IC50	US9932325B2. Compounds, compositions, and methods (2018)
ChEMBL	Biochemical Assay: Materials:LRRK2 G2019S enzymeSubstrate (LRRKtide)ATPTR-FRET dilution bufferpLRRKtide antibody384-well assay plateDMSOEnzyme Reaction Conditions50 mM Tris pH 7.5, 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35.2 mM DTT5 nM LRRK2134 μM ATP60 minute reaction time23° C. reaction temperature10 μL total reaction volumeDetection Reaction Conditions1× TR-FRET dilution buffer10 mM EDTA2 nM antibody23° C. reaction temperature10 μL total reaction volumeCompounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil.To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2×ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes.To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	7.52	pIC50	<30	nM	IC50	US-11111235-B2. Compounds, compositions, and methods (2021)
ChEMBL	Biochemical Assay : Materials: LRRK2 G2019S enzyme Substrate (LRRKtide) ATP TR-FRET dilution buffer pLRRKtide antibody 384-well assay plate DMSOEnzyme Reaction Conditions 50 mM Tris pH 7.5, 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35, 2 mM DTT 5 nM LRRK2 134 μM ATP 60 minute reaction time 23° C. reaction temperature 10 μL total reaction volumeDetection Reaction Conditions 1× TR-FRET dilution buffer 10 mM EDTA 2 nM antibody 23° C. reaction temperature 10 μL total reaction volumeTo perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using a 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	7.52	pIC50	<30	nM	IC50	US-10590114-B2. Compounds, compositions, and methods (2020)
ChEMBL	Biochemical Assay: Materials:LRRK2 G2019S enzymeSubstrate (LRRKtide)ATPTR-FRET dilution bufferpLRRKtide antibody384-well assay plateDMSOEnzyme Reaction Conditions50 mM Tris pH 7.5, 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35.2 mM DTT5 nM LRRK2134 μM ATP60 minute reaction time23° C. reaction temperature10 μL total reaction volumeDetection Reaction Conditions1× TR-FRET dilution buffer10 mM EDTA2 nM antibody23° C. reaction temperature10 μL total reaction volumeCompounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil.To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2×ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes.To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	7.52	pIC50	<30	nM	IC50	US-11111235-B2. Compounds, compositions, and methods (2021)
ChEMBL	Biochemical Assay: Materials: LRRK2 G2019S enzyme Substrate (LRRKtide) ATP TR-FRET dilution buffer pLRRKtide antibody 384-well assay plate DMSOEnzyme Reaction Conditions 50 mM Tris pH 7.5, 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35, 2 mM DTT 5 nM LRRK2 134 μM ATP 60 minute reaction time 23° C. reaction temperature 10 μL total reaction volumeDetection Reaction Conditions 1× TR-FRET dilution buffer 10 mM EDTA 2 nM antibody 23° C. reaction temperature 10 μL total reaction volumeCompounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil.To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2× ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes.To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using a 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	7.52	pIC50	<30	nM	IC50	US-9932325-B2. Compounds, compositions, and methods (2018)
ChEMBL	Biochemical Assay: Compounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil. To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2×ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes. To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using a 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	7.52	pIC50	<30	nM	IC50	US-11591316-B2. Compounds, compositions, and methods (2023)
ChEMBL	Biochemical Assay: Compounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil. To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2×ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes. To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using a 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	8.43	pIC50	3.69	nM	IC50	US-11591316-B2. Compounds, compositions, and methods (2023)
ChEMBL	Biochemical Assay: Materials:LRRK2 G2019S enzymeSubstrate (LRRKtide)ATPTR-FRET dilution bufferpLRRKtide antibody384-well assay plateDMSOEnzyme Reaction Conditions50 mM Tris pH 7.5, 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35.2 mM DTT5 nM LRRK2134 μM ATP60 minute reaction time23° C. reaction temperature10 μL total reaction volumeDetection Reaction Conditions1× TR-FRET dilution buffer10 mM EDTA2 nM antibody23° C. reaction temperature10 μL total reaction volumeCompounds were prepared by initially diluting to 1 mM with DMSO. 35 μL of reference compound solution, 35 μL of test compound solution, and 35 μL HPE were successively added to the source plate (384-well assay plate, Labcyte). The plates were centrifuged at 2500 rpm for 1 minute and sealed in foil. POD was used to perform a 3.162 fold serial dilution and 100 nL of reference compound solution, test compound solution, HPE and ZPE were transferred to assay plates. The assay plate was centrifuged at 2500 rpm for 1 minute, and sealed with foil.To perform the enzyme reaction, 5 μL of LRRKtide substrate and kinase mixture in assay buffer was added to all wells of the assay plate. The plate was centrifuged to concentrate the mixture at the bottom of the wells. The assay plate was incubated at 23° C. for 20 minutes. Following incubation, 5 μL of 2×ATP in assay buffer was added to each well, and plates were centrifuged to concentrate the mixture at the bottom of the wells. The plate was incubated at 23° C. for 60 minutes.To perform the detection of the reaction, EDTA completely mixed in TR-FRET dilution buffer was added to antibody reagent. 10 μL of detection reagent was added to all wells of each well of the assay plate and the plate was centrifuged to concentrate the mixture at the bottom of the wells. The plate was then incubated at 23° C. for 60 minutes. Plates were read on Perkin Elmer Envision 2104 instrument in TR-FRET mode using 340 nm excitation filter, 520 nm fluorescence emission filter, and 490 or 495 nm terbium emission filter.	B	8.43	pIC50	3.69	nM	IC50	US-11111235-B2. Compounds, compositions, and methods (2021)

ChEMBL data shown on this page come from version 36:

Zdrazil B, Felix E, Hunter F, Manners EJ, Blackshaw J, Corbett S, de Veij M, Ioannidis H, Lopez DM, Mosquera JF, Magarinos MP, Bosc N, Arcila R, Kizilören T, Gaulton A, Bento AP, Adasme MF, Monecke P, Landrum GA, Leach AR. (2024). The ChEMBL Database in 2023: a drug discovery platform spanning multiple bioactivity data types and time periods. Nucleic Acids Res., 52(D1). DOI: 10.1093/nar/gkad1004. [EPMCID:10767899] [PMID:37933841]
Davies M, Nowotka M, Papadatos G, Dedman N, Gaulton A, Atkinson F, Bellis L, Overington JP. (2015) 'ChEMBL web services: streamlining access to drug discovery data and utilities.' Nucleic Acids Res., 43(W1). DOI: 10.1093/nar/gkv352. [EPMCID:25883136]