ChEMBL ligand: CHEMBL5560494
FPR1/fMet-Leu-Phe receptor in Human [ChEMBL: CHEMBL3359] [GtoPdb: 222] [UniProtKB: P21462] There should be some charts here, you may need to enable JavaScript!
FPR2/N-formyl peptide receptor 2 in Human [ChEMBL: CHEMBL4227] [GtoPdb: 223] [UniProtKB: P25090] There should be some charts here, you may need to enable JavaScript!

DB	Assay description	Assay Type	Standard value	Standard parameter	Original value	Original units	Original parameter	Reference
FPR1/fMet-Leu-Phe receptor in Human (target type: SINGLE PROTEIN) [ChEMBL: CHEMBL3359] [GtoPdb: 222] [UniProtKB: P21462]
ChEMBL	Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay	F	6.59	pEC50	260	nM	EC50	Eur J Med Chem (2024) 265: 115989-115989 [PMID:38199163]
ChEMBL	FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.	B	6.59	pEC50	260	nM	EC50	US-10676431-B2. Phenylpyrrolidinone formyl peptide 2 receptor agonists (2020)
ChEMBL	Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.	B	6.59	pEC50	260	nM	EC50	US-11117861-B2. Phenylpyrrolidinone formyl peptide 2 receptor agonists (2021)
FPR2/N-formyl peptide receptor 2 in Human (target type: SINGLE PROTEIN) [ChEMBL: CHEMBL4227] [GtoPdb: 223] [UniProtKB: P25090]
ChEMBL	Agonist activity at FPR2 (unknown origin) expressed in CHO cells by cAMP assay	F	9.28	pEC50	0.53	nM	EC50	Eur J Med Chem (2024) 265: 115989-115989 [PMID:38199163]
ChEMBL	FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.	B	9.28	pEC50	0.53	nM	EC50	US-10676431-B2. Phenylpyrrolidinone formyl peptide 2 receptor agonists (2020)
ChEMBL	Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.	B	9.28	pEC50	0.53	nM	EC50	US-11117861-B2. Phenylpyrrolidinone formyl peptide 2 receptor agonists (2021)
GtoPdb	Measuring activation of FPR2 Gi coupling and downstream cAMP inhibition	-	9.3	pEC50	0.5	nM	EC50	J Med Chem (2026) 69: 4078-4089 [PMID:41701653]

ChEMBL data shown on this page come from version 36:

Zdrazil B, Felix E, Hunter F, Manners EJ, Blackshaw J, Corbett S, de Veij M, Ioannidis H, Lopez DM, Mosquera JF, Magarinos MP, Bosc N, Arcila R, Kizilören T, Gaulton A, Bento AP, Adasme MF, Monecke P, Landrum GA, Leach AR. (2024). The ChEMBL Database in 2023: a drug discovery platform spanning multiple bioactivity data types and time periods. Nucleic Acids Res., 52(D1). DOI: 10.1093/nar/gkad1004. [EPMCID:10767899] [PMID:37933841]
Davies M, Nowotka M, Papadatos G, Dedman N, Gaulton A, Atkinson F, Bellis L, Overington JP. (2015) 'ChEMBL web services: streamlining access to drug discovery data and utilities.' Nucleic Acids Res., 43(W1). DOI: 10.1093/nar/gkv352. [EPMCID:25883136]