lerociclib [Ligand Id: 10313] activity data from GtoPdb and ChEMBL

Click here for a description of the charts and data table

Please tell us if you are using this feature and what you think!

ChEMBL ligand: CHEMBL3904602 (Lerociclib, G1t38, G1T38, G1T38 FREE BASE)
There should be some charts here, you may need to enable JavaScript!
  • cyclin dependent kinase 2/Cyclin-dependent kinase 2 in Human [ChEMBL: CHEMBL301] [GtoPdb: 1973] [UniProtKB: P24941]
There should be some charts here, you may need to enable JavaScript!
There should be some charts here, you may need to enable JavaScript!
DB Assay description Assay Type Standard value Standard parameter Original value Original units Original parameter Reference
cyclin dependent kinase 6/CDK6/cyclin D3 in Human (target type: PROTEIN COMPLEX) [ChEMBL: CHEMBL2111448] [GtoPdb: 1978] [UniProtKB: P30281Q00534]
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 8.33 pIC50 4.7 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
GtoPdb Inhibition of CDK6/cyclin D3 complex - 8.33 pIC50 4.7 nM IC50 US9464092B2. Transient protection of normal cells during chemotherapy (2016)
cyclin dependent kinase 2/Cyclin-dependent kinase 2 in Human (target type: SINGLE PROTEIN) [ChEMBL: CHEMBL301] [GtoPdb: 1973] [UniProtKB: P24941]
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 5.45 pIC50 3580 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 5.82 pIC50 1510 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 8.45 pIC50 3.58 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 8.82 pIC50 1.51 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
cyclin dependent kinase 4/Cyclin-dependent kinase 4/cyclin D1 in Human (target type: PROTEIN COMPLEX) [ChEMBL: CHEMBL1907601] [GtoPdb: 1976] [UniProtKB: P11802P24385]
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 8.97 pIC50 1.06 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)
GtoPdb Inhibition of CDK4/cyclin D1 - 9 pIC50 1 nM IC50 US9464092B2. Transient protection of normal cells during chemotherapy (2016)
ChEMBL Caliper Assay: Selected compounds disclosed herein were tested in CDK4/cyclinD1, CDK6/CycD3 CDK2/CycA and CDK2/cyclinE kinase assays by Nanosyn (Santa Clara, Calif.) to determine their inhibitory effect on these CDKs. The assays were performed using microfluidic kinase detection technology (Caliper Assay Platform). The compounds were tested in 12-point dose-response format in singlicate at Km for ATP. Phosphoacceptor substrate peptide concentration used was 1 μM for all assays and Staurosporine was used as the reference compound for all assays. Specifics of each assay are as described below:CDK2/CyclinA: Enzyme concentration: 0.2 nM; ATP concentration: 50 μM; Incubation time: 3 hr.CDK2/CyclinE: Enzyme concentration: 0.28 nM; ATP concentration: 100 μM; Incubation time: 1 hr.CDK4/CyclinD1: Enzyme concentration: 1 nM; ATP concentration: 200 μM; Incubation time: 10 hr.CDK6/CyclinD3: Enzyme concentration: 1 nM; ATP concentration: 300 μM; Incubation time: 3 hr. B 9 pIC50 1 nM IC50 US-9464092-B2. Transient protection of normal cells during chemotherapy (2016)

ChEMBL data shown on this page come from version 27:

Gaulton A, Hersey A, Nowotka M, Bento AP, Chambers J, Mendez D, Mutowo P, Atkinson F, Bellis LJ, Cibrián-Uhalte E, Davies M, Dedman N, Karlsson A, Magariños MP, Overington JP, Papadatos G, Smit I, Leach AR. (2017) 'The ChEMBL database in 2017.' Nucleic Acids Res., 45(D1). DOI: 10.1093/nar/gkw1074. [PMCID:5210557]